|
Mods
Aug 17, 2021 16:37:48 GMT 10
Piper likes this
Post by Uralee on Aug 17, 2021 16:37:48 GMT 10
Lee, the beast looks great, need some dirt onboard once the lockdown is lifted ,,,, Rob, I actually rode the beast yesterday. Clocked up 2.2km going to the post office and back. A few spits of rain on the way but no mud....🤣
|
|
|
Mods
Aug 17, 2021 16:40:25 GMT 10
Uralee likes this
Post by Piper on Aug 17, 2021 16:40:25 GMT 10
It will happen,, the mud that is
|
|
|
Mods
Aug 21, 2021 14:38:06 GMT 10
Post by longtravel on Aug 21, 2021 14:38:06 GMT 10
Looking forward to seeing your mods Lee, bit like where’s Wally. Whats the best essential mods you have done? Jake Hi Jake, I wouldn't be heading off on a trip or rougher roads without the pin modification to stop the final drive twisting/cracking. That saves having to check if the nuts are loosening every time you stop. I am not sure what model you have but on the 2019 the breather on the final drive was a good mod. Mine didn't stop using oil until I had done 15,000kms. The first time I took it up to highway speeds it spewed oil all over the back rim. The breather fixed that. Another tip I picked up early on was to spray silicon on the donut holes. It does seem to slow the wear on those points. Cheer, Long Travel
|
|
|
Mods
Aug 21, 2021 16:52:05 GMT 10
via mobile
haitch likes this
Post by Tvan on Aug 21, 2021 16:52:05 GMT 10
G’day Long Travel, Have 2020 model, have not had any issues with breather, as the bike is always out on rough dirt I check the torque on the drive each time I come home, have not had any issues with nuts being loose and torque has remained constant. Did have issues removing drive when I wanted to lube the drive shaft spline. Its a really tight fit to the swing arm so hoping issues you guys have had with that may be resolved on the 2020 or I have been lucky. Good advice on the spray, thanks
Jake
|
|