|
idling
Jan 30, 2022 8:07:31 GMT 10
Post by Mark on Jan 30, 2022 8:07:31 GMT 10
Thanks again to all. Will try all suggestions. 😉
|
|
|
idling
Feb 4, 2022 16:28:43 GMT 10
Post by Mark on Feb 4, 2022 16:28:43 GMT 10
okay back to the idle saga. Tried all suggestions again, searching for air intake problem. Thanks again to all but did not fix the problem. The underside of cylinders are showing oil seeping, but not dripping. Is this normal ?
|
|
|
idling
Feb 4, 2022 17:00:38 GMT 10
Post by Uralee on Feb 4, 2022 17:00:38 GMT 10
Oil leaks are not normal.
It is a 2016 isn’t it ? Disconnect the throttle cables. Back off the idle stop screws. If idle is high you have an air leak……..somewhere. 👀👀
|
|
|
idling
Feb 4, 2022 21:14:13 GMT 10
Post by Mark on Feb 4, 2022 21:14:13 GMT 10
yep it's a 2016. That seepage is looking more like it then. Thanks
|
|
|
idling
Feb 25, 2022 19:20:49 GMT 10
Post by wilmo on Feb 25, 2022 19:20:49 GMT 10
Post a picture of the seepage, my 2014 gets a bit oily on the cylinders (but not to the point that it drips) and runs perfectly fine.
|
|
|
idling
Feb 27, 2022 14:12:28 GMT 10
Post by Mark on Feb 27, 2022 14:12:28 GMT 10
Think this went through Wilmo. I tried just backing screws out on butterflies and re doing. Not sure why, but got the idle and balance back to normal
|
|
|
idling
Feb 27, 2022 14:37:49 GMT 10
Mark likes this
Post by wilmo on Feb 27, 2022 14:37:49 GMT 10
Yep, underside of the cylinders on my bike look like that too and runs fine so that’s not it. Sounds like you have it sorted now?
|
|
|
Post by Uralee on Feb 27, 2022 14:44:32 GMT 10
Check the head bolt tensions. Might just need a tad more.
|
|
|
idling
Feb 27, 2022 16:18:18 GMT 10
Mark likes this
Post by wilmo on Feb 27, 2022 16:18:18 GMT 10
Checked the tensions, all to spec!
|
|
|
idling
Feb 27, 2022 17:38:54 GMT 10
Post by Mark on Feb 27, 2022 17:38:54 GMT 10
will do thanks guys
|
|