|
Post by haitch on Sept 1, 2023 22:44:59 GMT 10
You might need to check the 2 into 1 pipe routing. I would also suggest you talk to Ural AU. Confirming the pipe spacing across the frame. 2 into 1 on the 2022 may be narrower across the frame. Have a look at my recent vid to see what I mean. I just fitted a Ural protection plate.
|
|
|
Post by twomotokiwis on Sept 2, 2023 20:04:02 GMT 10
You might need to check the 2 into 1 pipe routing. I would also suggest you talk to Ural AU. Confirming the pipe spacing across the frame. 2 into 1 on the 2022 may be narrower across the frame. Have a look at my recent vid to see what I mean. I just fitted a Ural protection plate. Thanks mate will do, been watching listening and learning. We will get to our bike Saturday morning to drop out gear of so I will take actual measurements 👏 Cheers Andi
|
|
|
Post by twomotokiwis on Sept 9, 2023 17:51:39 GMT 10
You might need to check the 2 into 1 pipe routing. I would also suggest you talk to Ural AU. Confirming the pipe spacing across the frame. 2 into 1 on the 2022 may be narrower across the frame. Have a look at my recent vid to see what I mean. I just fitted a Ural protection plate.
Heya fellas
Ok, we were at Скиппи today, fine looking beast she is LOL.
These are the dimensions, sump is 60mm deep, the distance between the head pipes at the cats is 180mm, the clearance between the cat and the frame is 15mm, engine bolts spacings are 190mm (assumed they have not changed).
Will try and swing some pics up.
(edit, did it somehow, see exhaust pics thread above)
|
|
|
Post by michaelk on Sept 10, 2023 13:14:34 GMT 10
Hi,
Just looked at your pics.
I've got 2 into 1 GPR pipes, without Cats.
I think it would fit your bike, and if not, it would be easy to make new brackets to suit.
Up to you.
Mick
|
|
|
Post by twomotokiwis on Sept 11, 2023 11:04:42 GMT 10
Are there linkpipes available to replace the bottom cats?
If I were at home with my workshop the deal would be done now however anything I get done will have to be at an engineering shop in Mildura so that will mean how much money?
My dilemma 😂
|
|
|
Post by michaelk on Sept 11, 2023 15:00:43 GMT 10
I think any farm implement workshop in a country town would have a length of suitable SS tube. Of course, I'm not suggesting that you remove the cats!!!
but if you did, would that affect the electronic mapping of the bike? I, personally, don't know.
Mick
|
|
|
Post by haitch on Sept 11, 2023 22:03:14 GMT 10
Are there linkpipes available to replace the bottom cats? If I were at home with my workshop the deal would be done now however anything I get done will have to be at an engineering shop in Mildura so that will mean how much money? My dilemma 😂 I assume you mean exclusion of lower set of cats.I think its far too new for those to be off the shelf. Even GPR made a new arrangment (I think?) for the 2022.
|
|
|
Post by Uralee on Sept 12, 2023 8:32:16 GMT 10
Hiw long are the lower cats? On the earlier bikes we just removed them and moved the mufflers forward.
|
|
|
Post by twomotokiwis on Sept 12, 2023 15:17:35 GMT 10
I don't know as we are not at the bike now for 5 weeks.
I am going to have to leave the plate as I do not have access to an engineering shop etc so will just go for the factory version which Matt says will fit.
Getting the rear rack and skid plate sent as one.
Tomorrow we are back to New Zealand so we can get our shit together then we return 24 October, looking forward to it.
Cheers Andi
|
|