|
|
Post by maccaoz on Jun 25, 2019 17:01:52 GMT 10
All as usual Harry's Place 9 am. All welcome 👍
|
|
andyh
2015 Tourist
Posts: 953
|
Post by andyh on Jun 27, 2019 4:47:29 GMT 10
Should be there.
|
|
|
|
Post by chrisdips on Jul 1, 2019 9:10:48 GMT 10
I'm hoping to be there three.
|
|
andyh
2015 Tourist
Posts: 953
|
Post by andyh on Jul 1, 2019 16:29:56 GMT 10
Which is good because the whole suspension thing has got me asking myself a lot of questions I am not really good at answering and I need someone to take the sag measurements whith me on the bike and someone (Chris) in the chair  |
|
|
|
Post by Uralee on Jul 1, 2019 17:15:18 GMT 10
Mine had zero static sag for years until many thousands of corrugated kilometres took their toll on the rear.
|
|
|
|
Post by chrisdips on Jul 1, 2019 17:45:04 GMT 10
Whatever you do, don't trust Chris with the tape measure!
|
|
andyh
2015 Tourist
Posts: 953
|
Post by andyh on Jul 1, 2019 20:50:31 GMT 10
Ok, we let Macca use the tape measure?
Ikons Lee - I doubt my old Sachs had any sag what so ever, but I know the Ikons do.
I just wanted some measurements so I had a baseline.
|
|
|
|
Post by chrisdips on Jul 7, 2019 7:29:11 GMT 10
Damp morning in Ippy but I'm still heading out for coffee.
|
|
|
|
Post by maccaoz on Jul 7, 2019 7:41:32 GMT 10
Me 2 😄
Looking like a wet ride to Rosewood.
|
|
andyh
2015 Tourist
Posts: 953
|
Post by andyh on Jul 7, 2019 14:00:49 GMT 10
Soggy.
Measured the suspension sag with Macca on the bike. (this is with the Ikons fitted)
18-19mm on the front and 25 on the rear. Chair didn't move.
So going on the magical fitting guide from Ikon where 15mm is a single increase in pre-load, I need 1-2 preload on the front and full 3 on the rear - which is the opposite of what I currently have.
My set up was done in haste, with no testing, to overcome the horrible wallow at speed - might be time to find a bit of road and test and set it up it properly.
|
|
