Post by Deano on Nov 21, 2023 9:15:55 GMT 10
G'day,
Health issues are the reason for the above sale. Some info follows.
2020 Ural cT For Sale (8493km):
Rear Euro luggage rack (not fitted, never used), can be mounted on sidecar.
Final drive breather
Ikon shocks all round 4322km (huge improvement in handling and comfort). Plus original Sachs
Spare front pads (new, sintered). Original front pads, chair pads with little wear (changed out for sintered sets early, brakes frankly shit with organic pads)
LED reversing lights
Jerry can/nozzle and carrier
Spare wheel and carrier rack
Rear footpegs
Rear guard rack
Pillion pad for rack
Kaoko throttle lock. kaoko.com/product/ural100/ Along with the Ikon's best thing added.
Oil cooler (fitted at purchase - by Bruce, tsvsidecars@hotmail.com) on r/h engine protection bar
Tank knee pads
Rocker cover gaskets (genuine set, plus copied set)
Oil filter spare (new Ryco)
Spare plugs (new)
New Oxford grips (fitted)
Fuel tank disconnect line fitted
RH pillion grab/lifting handle
Brake lever stop/adjuster manufactured and fitted. Only the footpeg rubber stops the lever std. with no adjustment for position.
Footpeg extension (30mm) welded on.
Clutch cable adaptor manufactured/fitted at gearbox actuator (negates need to remove battery to remove clutch cable)
Wheels rotated 5000km. Spare - back, back - chair, chair - front, front - spare
Serviced 809k & 5000km Penrite MC-4ST full synthetic.
$23 000 firm
Rear Euro luggage rack (not fitted, never used), can be mounted on sidecar.
Final drive breather
Ikon shocks all round 4322km (huge improvement in handling and comfort). Plus original Sachs
Spare front pads (new, sintered). Original front pads, chair pads with little wear (changed out for sintered sets early, brakes frankly shit with organic pads)
LED reversing lights
Jerry can/nozzle and carrier
Spare wheel and carrier rack
Rear footpegs
Rear guard rack
Pillion pad for rack
Kaoko throttle lock. kaoko.com/product/ural100/ Along with the Ikon's best thing added.
Oil cooler (fitted at purchase - by Bruce, tsvsidecars@hotmail.com) on r/h engine protection bar
Tank knee pads
Rocker cover gaskets (genuine set, plus copied set)
Oil filter spare (new Ryco)
Spare plugs (new)
New Oxford grips (fitted)
Fuel tank disconnect line fitted
RH pillion grab/lifting handle
Brake lever stop/adjuster manufactured and fitted. Only the footpeg rubber stops the lever std. with no adjustment for position.
Footpeg extension (30mm) welded on.
Clutch cable adaptor manufactured/fitted at gearbox actuator (negates need to remove battery to remove clutch cable)
Wheels rotated 5000km. Spare - back, back - chair, chair - front, front - spare
Serviced 809k & 5000km Penrite MC-4ST full synthetic.
$23 000 firm
Cheers
Deano
bullyboy1956@gmail.com
0449156538
