andyh
2015 Tourist
Posts: 953
|
Post by andyh on Feb 21, 2020 15:33:37 GMT 10
Not all EFI Throttle Body inlet flanges are the same as I recently found out:
Apparently the EFI throttle body changed in 2016 and the outlet throat is wider (40mm? unconfirmed) which requires a new "Compliance Flange".
2014 and 15 TB's have a 37.5mm outlet and fit the KOK IPO175 flange.
Hopefully someone other than me finds the information useful.
|
|
|
Post by wilmo on May 7, 2020 9:55:20 GMT 10
That’s good to know. Was reading on soviet steeds in the 2014 hard starting thread that these compliance flanges sometimes crack and aren’t then air tight. Worth getting the correct part when required!
|
|
|
Post by Uralee on May 7, 2020 12:16:59 GMT 10
That’s good to know. Was reading on soviet steeds in the 2014 hard starting thread that these compliance flanges sometimes crack and aren’t then air tight. Worth getting the correct part when required! Yes, as a spare.....😜
|
|
|
Post by wilmo on May 7, 2020 12:49:45 GMT 10
How often to they crack?!?
|
|
|
Post by Uralee on May 7, 2020 15:34:04 GMT 10
I have never had one split but have seen quite a few. Maybe clumsy big feet are an issue....🤣
|
|