|
Post by wilmo on May 6, 2020 10:46:59 GMT 10
|
|
|
Post by brucek on May 6, 2020 11:29:56 GMT 10
Ural drain plugs have a 17mm hex head but the thread is 14mm.
|
|
|
Post by wilmo on May 6, 2020 12:00:53 GMT 10
Oops, yes of course! Needed a coffee....thanks.
|
|
andyh
2015 Tourist
Posts: 953
|
Post by andyh on May 8, 2020 7:13:08 GMT 10
Most bearing shops will have Dowty or equivalent washer. Personally prefer the copper ones for the sump, GB and final drive drains.
|
|
|
Post by ploz58 on Jun 3, 2021 11:11:31 GMT 10
i just brought some 14mm washer from Ural HQ,Oz and they are all Dowty washers!
|
|
andyh
2015 Tourist
Posts: 953
|
Post by andyh on Jun 4, 2021 4:43:57 GMT 10
i just brought some 14mm washer from Ural HQ,Oz and they are all Dowty washers! Same happened to me, I got in touch with Clare and re-ordered the copper. That was a while ago, it is possible they don't stock them anymore.
|
|
|
Post by ploz58 on Jun 4, 2021 12:59:12 GMT 10
i imagine these might be the preference now,
|
|
|
Post by Uralee on Jun 4, 2021 14:38:14 GMT 10
Dowty, copper, aluminium or nylon...........if you can’t seal a plug with any of them.......you have other issues.
|
|
andyh
2015 Tourist
Posts: 953
|
Post by andyh on Jun 5, 2021 5:45:06 GMT 10
Dowty, copper, aluminium or nylon...........if you can’t seal a plug with any of them.......you have other issues. Copper is reusable, cheap and effective.
|
|