Post by misterfog on Nov 6, 2021 18:13:32 GMT 10
Hi guys , need the headsup on installing crankshaft main bearings . Ive got a 2013 model in which Ive purchased a D10 marked crankshaft as I wasnt feeling real confident with the original crank installed after I noticed more than a 1mm transversal movement in the conrods even though there was no longitudal movement .
My question is - has anyone removed ,or is it possible to remove the front bearing housing from the engine block ?
Its on real tight and Im inquisitive as to the procedure to remove it if possible as it would make the istallation of the bearing easier Although I dont have a bearing press , I do have a hand operated wheel bearing press that would suffice . Outlined in red is the housing Im refering to . Cheers Vic
My question is - has anyone removed ,or is it possible to remove the front bearing housing from the engine block ?
Its on real tight and Im inquisitive as to the procedure to remove it if possible as it would make the istallation of the bearing easier Although I dont have a bearing press , I do have a hand operated wheel bearing press that would suffice . Outlined in red is the housing Im refering to . Cheers Vic
