|
Post by keith on May 26, 2022 10:08:55 GMT 10
I must be missing somemthing , but how do I get this bolt out ? My sidecar shock is leaking.
|
|
|
Post by keith on May 26, 2022 10:26:47 GMT 10
No worries, I got it off , now to see if I can get it repaired , or get a new one ?
Any suggestions ?
|
|
|
Post by haitch on May 26, 2022 11:05:41 GMT 10
So, did you need to compress or extend the shock? Can you post a photo of the bolt damage?
I would check the shock rubbers as well. Top and bottom?
|
|
|
Post by keith on May 26, 2022 11:19:40 GMT 10
So, did you need to compress or extend the shock? Can you post a photo of the bolt damage? I would check the shock rubbers as well. Top and bottom? No damage , there is a bit of give because of the rubber bung at the bottom , I just slid the top off and the bottom bolt came out no problems. Just trying to source a replacement , no luck so far , all the shock absorber places Ive contacted can't find it. Has anyone got a replacement part source ?
|
|
|
Post by haitch on May 26, 2022 14:03:21 GMT 10
Keith. I may be wrong (happens a bit) but I thought those rubbers were part of a pressed in bush??. Others here will correct me. Having said that, a call to Ural might help.
|
|
|
Post by keith on May 26, 2022 16:19:11 GMT 10
Keith. I may be wrong (happens a bit) but I thought those rubbers were part of a pressed in bush??. Others here will correct me. Having said that, a call to Ural might help. Yeah , no worries , there is some give in those rubber bushes , I watched the Ural video on how to do it where they replaced them with Nitron Shocks. Once I had popped the top off I had to take the wheel off to raise it up and take the lower bolt out. Ural Australia have some in stock , I might get a new one under Warranty , hopefully. I will have to compress the shock a little bit to get it back on , any tips aprreciated.
|
|
bewildered
Tool for reverse shift lever removal
Posts: 276
|
Post by bewildered on May 26, 2022 16:59:27 GMT 10
Hello Keith I have a shock which I can send you, PM me if interested.
|
|
|
Post by keith on May 26, 2022 23:22:34 GMT 10
Thanks PM sent.
|
|