|
LED's
Dec 2, 2023 16:03:19 GMT 10
via mobile
Post by haitch on Dec 2, 2023 16:03:19 GMT 10
Hi all. Got some led globes coming to replace stop/blinker lights. 1156's and one 1157.
Question is, what flasher can do I need?? Looking for straight swap if posible.
TIA
Haitch.
|
|
|
Post by Uralee on Dec 2, 2023 17:23:12 GMT 10
Probably this one……
|
|
|
Post by taz on Dec 2, 2023 18:33:25 GMT 10
I used one of the adjustable ones for my ute. But I found that the adjustment was in a way that I would always have it turned up to the fastest position. Also the adjustment pot needs extra room. So I would go for a non adjustable one. You need an electronic flasher with the same connections as you have them on the existing relay.
|
|
|
LED's
Dec 2, 2023 22:47:38 GMT 10
via mobile
Post by haitch on Dec 2, 2023 22:47:38 GMT 10
I used one of the adjustable ones for my ute. But I found that the adjustment was in a way that I would always have it turned up to the fastest position. Also the adjustment pot needs extra room. So I would go for a non adjustable one. You need an electronic flasher with the same connections as you have them on the existing relay. Thanks Taz
|
|
|
Post by philg on Dec 6, 2023 15:07:43 GMT 10
Hi all. Got some led globes coming to replace stop/blinker lights. 1156's and one 1157. Question is, what flasher can do I need?? Looking for straight swap if posible. TIA Haitch. I was far to lazy so I ordered a LED set and relay from NE Ural back in July with other farkles, all work great, so much brighter. Visiting in October we picked up a harness and switch to get a hazard lighting system but didn't get the LED flasher relay they supply. The Repco Narva LED relay didn't work so waiting on one via ebay. Not sure how Ural get these new Ural past without hazard lights or ABS?
|
|
|
Post by wilmo on Dec 6, 2023 15:15:56 GMT 10
|
|
|
Post by Uralee on Dec 20, 2023 14:02:51 GMT 10
For a “simple” hazard light solution, just join the left and right wires in the mess behind the headlamp.
Left (unused flasher) is a single purple wire. Run this to an on/off switch and back to the right flasher wire. No relay required… Simples and job done. 😇
|
|