|
Grease
Feb 29, 2024 8:42:31 GMT 10
via mobile
Post by mcmarty on Feb 29, 2024 8:42:31 GMT 10
My old grease gun won’t fit on the nipple on the uni shaft nipple any advice would be greatly appreciated
|
|
|
Post by haitch on Feb 29, 2024 9:34:28 GMT 10
If you are talking about the main drive shaft, Its a bugger. you may need to buy a needle fitting that goes over the top of your normal grease gun fitting. Also you can sometimes get better access with the rear wheel out (grease your splines at the same time) This has come up before and there are photos on here of the fitting.
|
|
|
Post by miker on Feb 29, 2024 12:18:33 GMT 10
|
|
|
Grease
Feb 29, 2024 13:23:57 GMT 10
via mobile
andyh likes this
Post by haitch on Feb 29, 2024 13:23:57 GMT 10
|
|
|
Grease
Feb 29, 2024 13:33:05 GMT 10
Post by Uralee on Feb 29, 2024 13:33:05 GMT 10
I have a needle point fitting but not sure the grease is getting in.
|
|
|
Grease
Feb 29, 2024 17:57:25 GMT 10
via mobile
Post by haitch on Feb 29, 2024 17:57:25 GMT 10
I have a needle point fitting but not sure the grease is getting in. Yes its not easy even with a needle point..You need to get it right on top of the little ball. I think you also need a gun with a rigid neck.
|
|