|
Post by brucek on Jul 11, 2017 16:10:31 GMT 10
Just fitted a 90W Light Bar. Purchased off eBay. Looks ok so far but still need to get out and check/adjust the aim. Gotta love LEDs, it's good to know there's no need for relays or risk of cooking the wiring or the high beam switch. For the technically inclined, @ 13V it pulls 1.6 Amps, roughly equivalent to a 21 W bulb but produces loads more light of course.
|
|
|
Post by max on Nov 30, 2017 10:11:54 GMT 10
Hi looks good.Im getting one myself and I'm glad I could see one on a car first thanks. Have you wired it direct to the high beam on the bike or on a separate switch .... Max
|
|
|
Post by brucek on Nov 30, 2017 11:29:53 GMT 10
Hi looks good.Im getting one myself and I'm glad I could see one on a car first thanks. Have you wired it direct to the high beam on the bike or on a separate switch .... Max Hi Max, no separate switch, I ran the feed wire up into the headlight shell and tapped into the high beam wire so it comes on with the high beam.
|
|
|
Post by max on Nov 30, 2017 17:03:06 GMT 10
Yeah good idea think I'll be doing the same makes life easier
|
|